SolarLayoutSolarLayout
SubstationLayout

AIS and GIS pooling and switching substation design

Design and engineering of pooling and switching substations: single-line diagram, yard layout, 3D model, calculations, bill of materials and compliance checklist. Standards set per project.

Built forUtilitiesRenewable developersEPC contractorsDesign consultants
3D model of a pooling substation designed in SubstationLayout: switchyard bays, power transformers, buildings, lightning masts and fence
Application range

Application range per standards set

Application rangeIEC, CEA and CBIPANSI, IEEE and NESC
Pooling substations33 kV to 400 kV69 kV to 345 kV
Switching substations132/33 kV to 765/400 kV115/69 kV to 345/230 kV
MV bus11 kV and 33 kV34.5 kV
PlantsWind, solar, hybrid, thermal and otherWind, solar, hybrid and other inverter-based
Frequency50 Hz or 60 Hz60 Hz
Sheets and unitsA1, metricANSI D, feet and inches, AWG and kcmil
Workflow

Design workflow

01

Define

Select the standards set. Enter the plant or substation and grid, the HV switchyard, the MV system, the site and soil, and the protection.

02

Run design

A design run calculates the design steps, each with a verdict. Steps affected by an input change are marked Out of date until the next run.

03

Review and edit

Read the sheets, the 3D model and the calculation trail per step. Edit the drawings in Sketch mode and the layout in the yard plan.

04

Issue

Issue a revision with its inputs, design run and document package. Download the files from their step or as one ZIP package.

Drawings, model and calculations

Sample project output

Screens of the 220/33 kV pooling substation sample for a 250 MW plant, per IEC, CEA and CBIP.

Single-line diagram
SubstationLayout's single-line diagram of the 220/33 kV sample: a 220 kV AIS double main bus and a 33 kV sectionalised bus, with notes, ratings and legend
Single-line diagram with IEC 81346 designations or IEEE C37.2-1996 device numbers, and instrument transformer ratios.
Yard section
Yard layout section A-A of a 220 kV line bay, with bus, disconnector, circuit breaker, CT, CVT, surge arrester and gantry, dimensioned in metres
Yard sections at 1:200, 1:250 or 1:500, with phase and ground clearances per CBIP and CEA or RUS and NESC.
3D substation model
3D model of the 220/33 kV sample substation with the power transformer ICT-1 selected, showing its IFC class and rating
Gantries, equipment, transformers, buildings, fence, lightning masts and earth mat at design dimensions, with IFC 4 class and ratings per object.
Earthing per IEEE 80
Earth mat of the sample substation with the mesh voltage of 584 V against the tolerable touch voltage of 685 V, per IEEE 80 §16.5.1
Mesh voltage 584 V against the tolerable touch voltage of 685 V, grid resistance 0.476 Ω, mesh spacing 3.97 m.
Capabilities

Drawings, model and engineering calculations

Single-line and key diagrams

IEC 81346 designations and IEC 60617 symbols, or IEEE C37.2-1996 device numbers. Electrical key diagram with bay numbers and device tags.

Yard layout and sections

Plan at 1:500 to 1:2000 or 1″ = 40′ to 1″ = 200′, sections at 1:200 to 1:500. Clearances per CBIP and CEA, or RUS Bulletin 1724E-300 and NESC.

3D substation model

AIS yards, and GIS halls with bays, main buses and SF6/air bushings. Export to IFC 4 (georeferenced), 3D DXF and glTF.

Earthing and grounding

Per IEEE 80-2013: tolerable touch and step voltages, grid resistance, mesh and step voltages, mesh spacing selection.

Short circuit and ratings

Per IEC 60909-0:2016 or IEEE C37.010-2016, with CB, short-time and earth-mat current checks per IEEE C37.04-2018.

Lightning protection

Direct-stroke protection per IEEE 998-2012 (rolling sphere) and IEC 62305-3 (LPL I sphere): mast and shield-wire placement.

Auxiliary supply

Load list, transformer and generator sizing, battery per IEEE 485-2020 and chargers per IEEE 946-2020, breaker ratings.

BOM and compliance checklist

Bill of materials from the SLD, the yard and the calculations. Compliance checklist per standards set, with the standard cited per item.

Revisions and project tools

Sketch mode on the sheets, draft and issued revisions, run history and comparison, DXF import, and a library of approved makes.

Deliverables

Documents per design run

File names by document number and revision. Download as one ZIP package.

  • DrawingsDXF · PDF
  • Calculation reportsPDF
  • Bill of materialsXLSX · PDF
  • Compliance checklistXLSX · PDF
  • 3D modelIFC 4 · 3D DXF · glTF
  • Document packageZIP

Sample project

220/33 kV pooling substation for a 250 MW plant, per IEC, CEA and CBIP, in the projects list. Select Run design to calculate it.

Utility-scale PV plant layout: Explore SolarLayout Desktop